Components

The main components of the BNA F3 safe are:

1 - Banknote acceptor
Counts and authenticates up to 800 banknotes per minute.

2 - Control console
Consisting of a touchscreen monitor, printer, and RFID card reader.

3 - Safebag Insertion
To deposit unrecognized banknotes or other valuables.

4- Lock and Opening Handle
Under the exclusive responsibility of the security guard.

You can identify these parts on the bill acceptor:

Banknote tray
Place the bills to initiate a deposit placing them
correctly.
Reject Slot
Unrecognized banknotes are rejected here.
Upper / Lower Slot
Spaces where you can possible access to remove any
stuck banknotes or foreign bodies.

Opening the Upper Compartment

To open the upper compartment, press the green lever A
located behind the note tray and lift the compartment from
the rear. To close the upper compartment, lower it until
you hear a clicking sound.

Opening the Lower Compartment

To open the lower compartment, lift the green lever B
and lift the compartment upwards.
To close the lower compartment, lower it until
you hear a clicking sound.

Opening the Reject Slot

To open the Reject Slot, first open the lower compartment,
then press the green lever C and the base will lower
itself. To close the Reject Slot, lift the base until it clicks
into place. you will not hear a snapping noise or close the
bottom compartment as described above.

Removing stuck banknotes

By following the instructions for opening the slots, you can remove banknotes stuck inside the acceptor.

Shown here are examples of banknotes stuck inside the
acceptor, found after opening the corresponding slot.

Once you've removed the banknotes and closed all the compartments, you'll need to tap the following button on
the monitor:

(click the button above for specifications)